Building Orudios / Orudiossu

Orudios consists of:

8 Sprues

36 Caps

1 Pre-Built Gear 

1 Gear Sprue (Sprue B)

1 Motor

1 Motor

1 Pilot

1 Sticker Sheet

The build begins with placing the "L" shaped bar into the grade up gear box upper plate

Next, a variety of gears are aligned in the gear box and the box is held together with a rectangular retainer 

The tail is then built and attached via one cap, as the inner triangular body panel is placed on each body half

The built gear box is sandwiched between two body halves along with the motor, and the top mount is positioned

The chest mounted cannons are placed along with a clip and two back plates

The head is then formed from four pieces

The eyes are placed and pilot seated, upper and lower neck armor is positioned 

The horses mane and horn are placed

Complete

Both side cannons are assembled 

Finished

Both cannons are then attached to the main unit via 2 caps per cannon for a total of 4 caps used

Construction begins on the upper wing with two pieces

Two more pieces are then assembled 

The former two pieces are then connected with an additional inner wing pieces and extension arm is added

The process is then repeated for the second wing

The left wing is attached by a rod

The left body plate is then placed

The process above is repeated for the right side, and a small clip secures the neck

The lower left foot is formed from 3 pieces and two caps

The upper left leg is formed with three pieces and held in place with 1 cap

The left leg is then attached to the body, a fender and chrome shin guard are added

The right hind leg is constructed from four pieces and secured with 3 caps

A fender is placed on the upper portion of the left hind leg

This process is repeated for the right legs, and battery cover and grade up bar are placed

The unit is now complete and ready to sticker

This has been a Zoid.US production. No image may be used without permission. © 2010 -WIKD