Building Barigator and it's variations.

Armored Gator consists of:

4 Sprues

8 Caps

1 Instruction Booklet

1 Motor

1 Sticker Sheet

1 Canopy (Ornage)

1 Pilot (Gold)

The built begins with placing the motor in the center of the two body frames.

Two "Axle" piece are then fitted on each side of the complete body frame along with an armor piece that hold them in place.

The same process is then repeated on the other side and the back plate is attached.

With the back plate in place, one set of legs is then assembled.

The opposite set of legs are then constructed.

We then move onto the head, which consists of four pieces.

The head is the attached to the body via one cap.

The tail is then built, starting with the end section.

The mid section is then constructed, and attached to the body.

The tail is then attached to the body.

The final step includes placing a total of four guns on the piece, below is kind of an exploded view.

Stickers are then placed on the Gator and the unit is ready for display. The sticker that comes with the piece does not feature the same sticker shown on the box, so I had to dif through my supply of vintage stickers to try and match the designs. I came up with all of them but the "RMZ" number designation design featured on the jaw. Armored Gator is a very vibrant, unique addition to any collection. I consider this piece a colorful oddity, and it makes for a very contrasting display piece when placed next to Barigator.

A few comparison shot with Barigator.

This has been a Zoid.US production. No image may be used without permission. � 2007 -WIKD